Hepyc 25mm HSS Reduced Shank Drill Blue Finish DIN 338 The Hepyc 25mm HSS Reduced Shank Drill is manufactured from high-speed steel and built to DIN 338 standards, offering durability, accuracy, and long service life. Its blue oxide finish reduces friction, enhances lubrication retention,...

Hepyc 24mm HSS Reduced Shank Drill Blue Finish DIN 338 The Hepyc 24mm HSS Reduced Shank Drill is precision-engineered from high-speed steel and manufactured to DIN 338 standards. Featuring a blue oxide finish, it reduces friction, enhances chip evacuation, and improves lubrication retention, resulting...

Hepyc 15mm HSS Reduced Shank Drill Blue Finish DIN 338 The Hepyc 15mm HSS Reduced Shank Drill is manufactured from high-speed steel and built to DIN 338 standards, ensuring precision and durability in a wide range of drilling applications. Its blue oxide finish reduces...

Hepyc 17.0mm HSS-Co Reduced Shank Drill – DIN 338 MR, 12mm Shank The Hepyc 17.0mm HSS-Co Reduced Shank Drill uses a 12 mm shank to machine larger diameters on standard equipment. Cobalt HSS resists heat and wear, and the 135° split point improves centering for accurate...

Hepyc 13.5mm HSS-Co Reduced Shank Drill – DIN 338 MR, 10mm Shank The Hepyc 13.5mm HSS-Co Reduced Shank Drill is designed for precise, repeatable drilling of larger diameters using a standard 10 mm chuck. Its cobalt-alloyed high-speed steel substrate delivers superior hot hardness and wear resistance,...

Hepyc 16.5mm HSS-Co Reduced Shank Drill – DIN 338 MR, 12mm Shank The Hepyc 16.5mm HSS-Co Reduced Shank Drill pairs a 12 mm shank with cobalt-alloyed HSS for durability and heat resistance. A 135° split point provides accurate, low-thrust starts and reduced walking. Conforming to DIN...

Hepyc 16.0mm HSS-Co Reduced Shank Drill – DIN 338 MR, 12mm Shank The Hepyc 16.0mm HSS-Co Reduced Shank Drill supports large-diameter drilling with a standard 12 mm chuck. Cobalt-alloyed HSS provides wear resistance and hot hardness, and the 135° split point improves self-centering to reduce walking....

Hepyc 18.5mm HSS-Co Reduced Shank Drill – DIN 338 MR, 12mm Shank The Hepyc 18.5mm HSS-Co Reduced Shank Drill combines a 12 mm shank with cobalt HSS for long life and heat resistance. The 135° split point improves self-centering and reduces walking. To DIN 338 MR with...

Hepyc 15.5mm HSS-Co Reduced Shank Drill – DIN 338 MR, 10mm Shank The Hepyc 15.5mm HSS-Co Reduced Shank Drill enables larger-diameter drilling with a standard 10 mm chuck. Cobalt-alloyed HSS delivers superior hot hardness and wear resistance, while the 135° split point improves centering and reduces...

Hepyc 19.0mm HSS-Co Reduced Shank Drill – DIN 338 MR, 12mm Shank The Hepyc 19.0mm HSS-Co Reduced Shank Drill uses a 12 mm shank to deliver larger hole sizes on standard equipment. Cobalt HSS resists heat and wear; a 135° split point provides accurate starts. Compliant...

Hepyc 13.0mm HSS-Co Reduced Shank Drill – DIN 338 MR The Hepyc 13.0mm HSS-Co Reduced Shank Drill is built for precise, repeatable drilling of larger diameters using a standard 10 mm chuck. Its cobalt-alloyed high-speed steel provides superior hot hardness and wear resistance, while the 135°...

Hepyc 15.0mm HSS-Co Reduced Shank Drill – DIN 338 MR, 10mm Shank The Hepyc 15.0mm HSS-Co Reduced Shank Drill enables large-diameter drilling using a standard 10 mm chuck. Its cobalt-alloyed high-speed steel provides excellent hot hardness and wear resistance, while the 135° split point self-centers to...

Hepyc 17.5mm HSS-Co Reduced Shank Drill – DIN 338 MR, 12mm Shank The Hepyc 17.5mm HSS-Co Reduced Shank Drill combines a 12 mm shank with cobalt HSS for durability and heat resistance. A 135° split point ensures precise starts and reduced walking. Made to DIN 338 MR...

Hepyc 18.0mm HSS-Co Reduced Shank Drill – DIN 338 MR, 12mm Shank The Hepyc 18.0mm HSS-Co Reduced Shank Drill enables large-diameter drilling using a standard 12 mm chuck. Cobalt HSS provides heat resistance and wear life, while the 135° split point aids centering and reduces thrust....

Hepyc 20.0mm HSS-Co Reduced Shank Drill – DIN 338 MR, 12mm Shank The Hepyc 20.0mm HSS-Co Reduced Shank Drill allows large-diameter drilling using a standard 12 mm chuck. Cobalt-alloyed HSS delivers hot-hardness and wear life, while the 135° split point improves centering and reduces walking. Compliant...

Hepyc 19.5mm HSS-Co Reduced Shank Drill – DIN 338 MR, 12mm Shank The Hepyc 19.5mm HSS-Co Reduced Shank Drill combines a 12 mm shank with cobalt HSS for durability and heat resistance. The 135° split point reduces walking and lowers thrust for clean starts. To DIN...

Bordo 1-3/16" HSS Reduced Shank Drill The Bordo 1-3/16" Reduced Shank Drill delivers large-diameter drilling with the convenience of a standard 1/2" shank, so it fits common drill chucks without special adapters. Made from high-speed steel (HSS) and finished in blue to promote lubricant...

Bordo 43/64" HSS Reduced Shank Drill The Bordo 43/64" Reduced Shank Drill combines a large cutting diameter with a convenient 1/2" shank, allowing use in standard drill chucks without special adapters. Manufactured from high-speed steel (HSS) and finished in blue to promote cutting-fluid retention,...

Bordo 53/64" HSS Reduced Shank Drill The Bordo 53/64" Reduced Shank Drill delivers large-diameter drilling with the convenience of a standard 1/2" shank, allowing use in common drill chucks without special adapters. Manufactured from high-speed steel (HSS) and finished in blue to promote cutting-fluid...

The Bordo 33/64" Reduced Shank Drill delivers accurate, large-diameter drilling with the convenience of a standard 1/2" shank, so it fits common drill chucks without special adapters. Manufactured from high-speed steel (HSS) and finished in blue to promote lubricant retention, it helps reduce friction...

Bordo 35/64" HSS Reduced Shank Drill The Bordo 35/64" Reduced Shank Drill combines a large cutting diameter with the convenience of a standard 1/2" shank, allowing use in common drill chucks without special adapters. Manufactured from high-speed steel (HSS) and finished in blue to...

Bordo 45/64" HSS Reduced Shank Drill The Bordo 45/64" Reduced Shank Drill delivers large-diameter drilling with the convenience of a standard 1/2" shank, allowing use in common drill chucks without special adapters. Manufactured from high-speed steel (HSS) and finished in blue to promote cutting-fluid...

Bordo 41/64" HSS Reduced Shank Drill The Bordo 41/64" Reduced Shank Drill combines a large cutting diameter with a convenient 1/2" shank, allowing use in standard drill chucks without a special holder. Manufactured from high-speed steel (HSS) with a durable blue finish, it offers...

Bordo 55/64" HSS Reduced Shank Drill The Bordo 55/64" Reduced Shank Drill pairs a large cutting diameter with a standard 1/2" shank so it fits common drill chucks without special adapters. Made from high-speed steel (HSS) with a blue finish that helps retain cutting...

Bordo 59/64" HSS Reduced Shank Drill The Bordo 59/64" Reduced Shank Drill offers large-diameter drilling with the convenience of a standard 1/2" shank, allowing use in common drill chucks without special adapters. Made from high-speed steel (HSS) with a blue finish that helps retain...

Bordo 49/64" HSS Reduced Shank Drill The Bordo 49/64" Reduced Shank Drill delivers large-diameter drilling with the convenience of a standard 1/2" shank, so it fits common drill chucks without special adapters. Manufactured from high-speed steel (HSS) with a durable blue finish, it promotes...

Bordo 39/64" HSS Reduced Shank Drill The Bordo 39/64" Reduced Shank Drill pairs a large cutting diameter with a standard 1/2" shank, allowing use in common drill chucks without special adapters. Manufactured from high-speed steel (HSS) and finished in blue to aid cutting-fluid retention,...

This Bordo reduced shank drill features a 118° notched point with a 30° helix. The notched point is a variation of the standard chisel point, designed to provide faster starting, reduced drill wander, and improved accuracy. A 118° point angle is ideal for materials...

HEPYC specialises in the manufacturing of Taps, Dies, Drills, End Mills, Reamers, Countersinks and Custom Tools. HEPYC offers a comprehensive range of industrial hardware, perfect for all your drilling, milling, and threading needs. HEPYC 1-1/16" HSS Reduced Shank Drill Specifications : 1-1/16" Cutting Diameter...

Hepyc Drill HSS DIN338N 11/16" – Reduced Shank 1/2", 118° Point The Hepyc HSS DIN 338N Jobber Drill Bit is manufactured from premium high speed steel (HSS) to provide reliable performance and long service life in general-purpose drilling applications. Built to DIN 338N standards,...